PATTON ELECTRONICS COMPANY
1012A (DUAL PORT)
|
Card Type |
Short Range Modem |
|
Chip Set |
Unidentified |
|
I/O Options |
25-pin serial port (RS-232), network interface via RJ-45, or RJ-11 connectors (2) |
|
Wiring Type |
Unshielded twisted pair |
|
Maximum Data Rate |
38.4Kbps |
|
Data Bus |
External |

|
CONNECTIONS | ||||||
|
Function |
Label |
Function |
Label | |||
|
DTE/DCE serial port (25-pin connector) |
CN1 |
UTP interface - secondary (RJ-45 or RJ-11) |
CN3 | |||
|
UTP interface - primary (RJ-45 or RJ-11) |
CN2 | |||||
|
Note: Secondary twisted pair connector used to facilitate daisy chaining | ||||||
|
USER CONFIGURABLE SETTINGS | ||
|
Setting |
Label |
Position |
|
DTE mode |
SW1 |
On |
|
DCE mode |
SW1 |
Off |
|
RTS/DCD CONTROL | ||
|
DCE |
DTE |
JP1 |
|
Carrier forced high |
Carrier forced high |
Open |
|
Carrier activated by RTS - pin 4 |
Carrier activated by DCD - pin 8 |
Closed |