MICRO-STAR INTERNATIONAL CO., LTD
MS-6125
| Device Type | Mainboard | 
| Processor | Pentium II | 
| Processor Speed | 200/233/266/300/333MHz | 
| Chip Set | Intel 440EX | 
| Video Chip Set | ATI 3D | 
| Maximum Onboard Memory | 512MB (EDO & SDRAM supported) | 
| Maximum Video Memory | 4MB | 
| Audio Chip Set | Yamaha YMF715 | 
| Cache | 256/512KB (located on Pentium II CPU) | 
| BIOS | Award | 
| Dimensions | 254mm x 207mm | 
| I/O Options | 32-bit PCI slots (2), Ethernet 10BaseT connector, floppy drive interface, game/MIDI interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), VGA port, IR connector, USB connectors (2), ATX power connector, line in, line out, microphone in, audio in – CD-ROM, SB-link connector, wake on LAN connector, wake on modem connector | 
 
| CONNECTIONS | |||
| Purpose | Location | Purpose | Location | 
| CPU fan power | C1 | Ethernet 10BaseT connector | CN6 | 
| Parallel port | CN1 | Line in | CN7 | 
| Serial port 1 | CN2 | Line out | CN8 | 
| VGA port | CN3 | Game/MIDI interface | CN9 | 
| Serial port 2 | CN4 | SB-link connector | J4 | 
| PS/2 mouse port | CN5 | Temperature sensor connector | J5 | 
| USER CONFIGURABLE SETTINGS | |||
| Function | Label | Position | |
| » | CMOS memory normal operation | JBAT | Pins 1 & 2 closed | 
| CMOS memory clear | JBAT | Pins 2 & 3 closed | |
| Power on mode select boot up by switch | JP2 | Closed | |
| Power on mode select immediate boot up | JP2 | Open | |
| On board video enabled | JVGA | Pins 1 & 2 closed | |
| On board video disabled | JVGA | Pins 2 & 3 closed | |
| DIMM CONFIGURATION | ||
| Size | Bank 0 | Bank 2 | 
| 8MB | (1) 1M x 64 | None | 
| 16MB | (1) 2M x 64 | None | 
| 16MB | (1) 1M x 64 | (1) 1M x 64 | 
| 24MB | (1) 2M x 64 | (1) 1M x 64 | 
| 32MB | (1) 4M x 64 | None | 
| 32MB | (1) 2M x 64 | (1) 2M x 64 | 
| 40MB | (1) 4M x 64 | (1) 1M x 64 | 
| 48MB | (1) 4M x 64 | (1) 2M x 64 | 
| 64MB | (1) 8M x 64 | None | 
| 64MB | (1) 4M x 64 | (1) 4M x 64 | 
| 72MB | (1) 8M x 64 | (1) 1M x 64 | 
| 80MB | (1) 8M x 64 | (1) 2M x 64 | 
| 96MB | (1) 8M x 64 | (1) 4M x 64 | 
| 128MB | (1) 8M x 64 | (1) 8M x 64 | 
| 128MB | (1) 16M x 64 | None | 
| 136MB | (1) 16M x 64 | (1) 1M x 64 | 
| 144MB | (1) 16M x 64 | (1) 2M x 64 | 
| 160MB | (1) 16M x 64 | (1) 4M x 64 | 
| 192MB | (1) 16M x 64 | (1) 8M x 64 | 
| 256MB | (1) 16M x 64 | (1) 16M x 64 | 
| 256MB | (1) 32M x 64 | None | 
| 264MB | (1) 32M x 64 | (1) 1M x 64 | 
| DIMM CONFIGURATION (CON’T) | ||
| Size | Bank 0 | Bank 1 | 
| 272MB | (1) 32M x 64 | (1) 2M x 64 | 
| 288MB | (1) 32M x 64 | (1) 4M x 64 | 
| 320MB | (1) 32M x 64 | (1) 8M x 64 | 
| 384MB | (1) 32M x 64 | (1) 16M x 64 | 
| 512MB | (1) 32M x 64 | (1) 32M x 64 | 
| Note: Board accepts EDO & SDRAM memory. | ||
| CACHE CONFIGURATION | 
| Note: 256KB/512KB cache is located on the Pentium II CPU. | 
| VIDEO MEMORY CONFIGURATION | 
| Note: The location of the video memory is unidentified. | 
| CPU SPEED SELECTION | ||||||||
| CPU speed | Clock speed | Multiplier | SW1/1 | SW1/2 | SW1/3 | SW1/4 | SW1/5 | SW1/6 | 
| 200MHz | 66MHz | 3x | On | On | Off | On | Off | Off | 
| 233MHz | 66MHz | 3.5x | On | Off | Off | On | Off | Off | 
| 266MHz | 66MHz | 4x | On | On | On | Off | Off | Off | 
| 300MHz | 66MHz | 4.5x | On | Off | On | Off | Off | Off | 
| 333MHz | 66MHz | 5x | On | On | Off | Off | Off | Off | 
 
| CONNECTIONS | |||
| Purpose | Location | Purpose | Location | 
| ATX power connector | ATX | Case connector | J3 | 
| Power fan power | C1 | Audio in – CD-ROM | J4 | 
| Chassis fan power | C2 | Line out, line, microphone in | J5 | 
| Microphone in | C3 | CD-ROM power connector | J14 | 
| USB connector 1 | CN1 | 32-bit PCI slots | PC1 – PC2 | 
| USB connector 2 | CN2 | Chassis intrusion switch | SW1 | 
| Floppy drive interface | CN3 | Wake on LAN connector | WOL | 
| IDE interface 2 | CN4 | Wake on modem connector | WOM | 
| IDE interface 1 | CN5 | ||
| Note: The ATX power connector is located on the backside of the riser card. | |||