ICL
ERGOPRO C3/33
| Processor | 80386SX | 
| Processor Speed | 33MHz | 
| Chip Set | TI | 
| Max. Onboard DRAM | 16MB | 
| Cache | None | 
| BIOS | ICL | 
| Dimensions | 430mm x 352mm | 
| I/O Options | PS/2 mouse port, parallel port, serial port, VGA port, floppy drive interface, IDE interface, riser slot | 
| NPU Options | 80378SX | 
 
| CONNECTIONS | |||
| Purpose | Location | Purpose | Location | 
| VGA port | CN1 | Floppy drive interface | CN6 | 
| PS/2 mouse port | CN2 | Reset switch | J3 | 
| Parallel port | CN3 | Chassis fan power | J4 | 
| Serial port | CN4 | IDE interface LED | J5 | 
| IDE interface | CN5 | Riser Card | SL1 | 
| USER CONFIGURABLE SETTINGS | |||
| Function | Jumper | Position | |
| » | On board VGA enabled | J1 | pins 2 & 3 closed | 
| On board VGA disabled | J1 | pins 1 & 2 closed | |
| » | CMOS memory normal operation | J2 | pins 1 & 2 closed | 
| CMOS memory clear | J2 | pins 2 & 3 closed | |
| DRAM CONFIGURATION | ||
| Size | Bank 0 | Bank 1 | 
| 2MB | (2) 1M x 9 | NONE | 
| 4MB | (2) 1M x 9 | (2) 1M x 9 | 
| 8MB | (2) 4M x 9 | NONE | 
| 16MB | (2) 4M x 9 | (2) 4M x 9 | 
| VRAM CONFIGURATION | |
| Size | Bank 0 | 
| 512KB | (4) 256K x 4 | 
| Note:VRAM is factory installed and is not configurable. | |