HYUNDAI ELECTRONICS, INC.
SUPER 286E PLUS
| Processor | 80286 | 
| Processor Speed | 12MHz | 
| Chip Set | Headland | 
| Max. Onboard DRAM | 4MB | 
| Cache | None | 
| BIOS | Award | 
| Dimensions | 350mm x 304mm | 
| I/O Options | Floppy drive interface, IDE interfaces (2), parallel port, serial ports (2) | 
| NPU Options | 80287 | 
 
| CONNECTIONS | |||
| Purpose | Location | Purpose | Location | 
| Reset switch | J1 | Floppy drive interface | J6 | 
| IDE interface LED | J2 | Serial port 1 | J22 | 
| Speaker | J3 | Serial port 2 | J23 | 
| Turbo LED | J4 | Parallel port | J24 | 
| IDE interface | J5 | ||
| USER CONFIGURABLE SETTINGS | |||
| Function | Switch | Position | |
| » | Bus speed select 8MHz | SW2/1 | On | 
| Bus speed select 12MHz | SW2/1 | Off | |
| » | Monitor type select color | SW2/2 | On | 
| Monitor type select monochrome | SW2/2 | Off | |
| » | Parallel port enabled | SW2/6 | On | 
| Parallel port disabled | SW2/6 | Off | |
| » | Serial port 1 select COM2 | SW2/7 | On | 
| Serial port 1 disabled | SW2/7 | Off | |
| » | Serial port 2 select COM1 | SW2/8 | On | 
| Serial port 2 disabled | SW2/8 | Off | |
| » | Floppy drive interface enabled | SW2/10 | On | 
| Floppy drive interface disabled | SW2/10 | Off | |
| » | Factory configured - do not alter | SW2/11 | N/A | 
| » | Factory configured - do not alter | SW2/12 | N/A | 
| DRAM CONFIGURATION | ||
| Size | Bank 0 | Bank 1 | 
| 1MB | (2) 256K x 9 | (2) 256K x 9 | 
| 2MB | (2) 1M x 9 | NONE | 
| 4MB | (2) 1M x 9 | (2) 1M x 9 | 
| PARALLEL PORT CONFIGURATION | |||
| Setting | SW2/3 | SW2/4 | SW2/5 | 
| LPT1 | On | Off | Off | 
| LPT2 | Off | On | On |