Card Type	Floppy drive controller
Processor	8088/8086, 80286/80386
Processor Speed	Unidentified
Maximum Onboard Memory	Unidentified
Floppy drives supported	360KB, 720KB, 1.2MB, 1.44MB
Data Bus	8-bit ISA

CONNECTIONS
Function	Location
34-pin floppy drive connector	CN1

HIGH CAPACITY DRIVE CONTROL SELECTION
Function		Label	Position
»	High capacity drive control disabled	JP1	Closed
	High capacity drive control enabled	JP1	Open
Note: For 8086/8088 based systems, the above jumper must be shorted regardless of drive capacity.

USER CONFIGURABLE SETTINGS
Function	Label	Position
Floppy drive C and D in use for 8088/8086 system	SW1/1	On
Floppy drive C and D not in use for 8088/8086 system	SW1/1	Off
Drive B is 360KB or 720KB	SW1/2	On
Drive B is 1.2MB or 1.44MB	SW1/2	Off
Drive A is 360KB or 720KB	SW1/3	On
Drive A is 1.2MB or 1.44MB	SW1/3	Off
Hard drive controller installed	SW1/4	On
Hard drive controller not installed	SW1/4	Off